Month: November 2017

How Does Steam Cleaning Work?

Steam cleaning has been on the market for many years, but even so there are many people who do not know how it works and doubt its effectiveness with respect to the more traditional cleaning of chemical products. In this article we will describe what steam cleaning consists of and we will evaluate its advantages and disadvantages.

How Does Steam Cleaning Work?

To perform a cleaning of this type we need a steam cleaning machine . There are two types;

Hot and dry steam cleaners : The water is heated to the boiling point and then they start to produce steam. This process takes only a few minutes for each liter of water. If you use hot water directly, the process is faster.

Cold and wet steam cleaners : these machines work without boiling water, so the steam is not hot, but it is very humid. The disadvantage is that they use more water than the hot steam machine and do not eliminate fungi and bacteria due to the water temperature.

At the time of cleaning, we simply have to apply steam choosing the type of accessory that best suits the surface we are going to clean. Although the steam dries itself, it is advisable to wipe it after the application to collect the dirt that has been descaled by the steam.

What Are The Advantages Of Steam Cleaning?

Steam cleaning not only disinfects , but also frees us from bad odors and eliminates mold . Besides being an ecological system , because you do not need additional detergents, it is also very useful in the kitchen because it acts as a great degreaser and eliminator of bacteria . It is also highly recommended for people with mite allergies as it manages to eliminate them better than using other cleaning products that contain chemical particles that are harmful to the body, as well as aggressive to the environment.

Steam cleaning covers a large number of surfaces such as floors, walls, fabrics, carpets, windows, mirrors, upholstery, …. allowing a more thorough cleaning because it reaches normally inaccessible areas.

Recommendations For Cleaning

Before starting to clean, check that the surface you are going to treat is compatible with this system, since there are materials that are more sensitive to this system. Next we are going to give you a list of surfaces that are compatible and incompatible with steam cleaning:

Compatible : floors, walls, fabrics, carpets, windows, mirrors, upholstery, glass, bathrooms, toys, ovens, curtains, and others

Incompatible : paper, cardboard, painted surfaces and wood.

Anyway, we recommend that before proceeding with the cleaning, make a test in a non visible area of the surface to be cleaned to know what effect the vapor will have on it.

Always wear protective gloves because steam can cause burns and do not forget to read and always follow the manufacturer’s instructions.

For more instructions, visit www.fibrecity.eu.

Read More »

Tricks To Clean The Shower Head

Does less and less water come out of the shower head? If the small holes in the head are clogging, you’d better implement these simple tricks to clean the head so that the water flows freely again.

If The Head Cannot Be Removed

The problem you can have with your shower is that the head is fixed and cannot be removed to clean. But this is not really a problem, because you can still uncover those holes just by using vinegar, that kitchen ingredient that always saves you when it comes to cleaning.

The mineral deposits (or tartar) that cover the shower, can be eliminated with this procedure: look for a strong plastic bag that is large enough to fit between the shower head. Fill it halfway with white vinegar and insert the head inside. Hold it with an elastic band and leave it there for a few hours or, if you can, all night.

The next day, remove the bag and discard it along with the vinegar. Use a toothbrush or similar to brush well the surface of holes and, why not, the top (or bell). Once you brush well, open the water to the maximum to flow and remove the remains that were left in the head. Finish the process by wiping with a cloth!

If You Can Take Out The Head

Most heads are unscrewed and can be removed, either to clean or to change when they break. If this is your case, remove the shower head, unscrewing gently, otherwise you can break it. To do it more safely, take it with a cloth.

Once you have it in your hand, open the faucet of the sink to the maximum and place the head upside down, so that the water passes from the holes inwards and drag any mineral deposit that is loose. Next, take a pin or needle and uncover each hole to remove all the tartar that covers them.

Return it to water and finally, let the head soak in a bowl with white vinegar for a few hours or until the next day. Rinse and place it in the shower.

Now that you know these tricks to uncover the head of the shower, you can bathe with all the water pressure that you like so much. if incase the shower is not working well then the recommendation is to replace your shower head with Top high pressure shower heads 2018. These high pressure shower heads are made with good quality material & are tested.

Read More »

R and D Records 2016 | All Rights Reserved.